330.845.8485
PO 242 • Kidron OH • 44636

Logging, Sawmill & Pallet Shop Equipment

35th Annual Air Works Consignment Auction

35th Annual Air Works Auction

3 Day Auction

GPS Location: Mt Hope Auction Grounds; 8076 SR 241 Millersburg OH 44654

Thursday, February 15th at 9:00 AM 4+ Auction Crews

Friday, February 16th at 8:30 AM Selling in 12+ Auction Crews

Saturday, February 17th at 8:30 AM Selling in 12+ Auction Crews

Heavy Equipment * Rolling Stock * Sawmill & Pallet Equipment * Logging Equipment * Power Units * Woodworking * Metalworking * Antiques & Collectibles * Misc. Tools & Equipment

Sawmill/Logging & Pallet Equipment Sells Online/Live Mostly Friday Feb. 16th  

Sawmills; 2024 Timber Buddy XP380 bandmill w/120 hp John Deere diesel, fully hydraulic, 2 clamps, chain turner, log lift, mudsaw, lazer; 2024 Timber Buddy MP362 bandmill w/35 hp Vanguard motor, power feed, Power head up/down, 1.5in band, 32in x 20ft cap.; 2024 Timber Buddy dandmill w/35 hp Vanguard motor, manual push, mudsaw, 1.5in band, 32in x 20 cap.; 2024 2 = MP360 manual bandmills w/23 hp Vanguard motor, 1.5in band, 34in x 16ft cap.; Bimford MJ30 manual bandmill w/new 13 hp Predator engine, 28in x 15ft cap.;   New Lumber Bear GHS-70 bandmill, 70in x 30ft cap., 35 hp Briggs engine; 2023 Timber Mule M300 manual portable bandmill, 16ft cap, 23 hp Vanguard motor; 2023 Timber Mule M200 manual portable bandmill, 20ft cap, 23 hp Vanguard motor; Frick 01 sawmill, 4 head block, left hand w/14ft carriage, handset, 45ft track; Portable Hurdle model 2002 automatic 56in sawmill w/2 head block Challenger carriage, 36iin opening, 48in x 40ft track, log turner and 24in x 20ft Taylor belt; Hurdle Challenger 3 head block carriage, air powered; JW Penny short log 36in circular sawmill w/6ft carriage; Fast Track bandmill, lineshaft; Timber Buddy 362 bandmill w/110 hp Vanguard motor; Woodland Mills HM130MAX portable bandmill, 14 hp Kohler engine; Resaws; Woodmizer 6 head horizontal resaw w/return, 460v 3ph; Baker BBR-0 band resaw w/return, 2 – 25 hp electric motors includes control panel, air jets; Shop built sizer w/return belt extension; Auburn Yieldpro sizer; 1999 Diehl ESL20 8ft board splitter; 1985 Cincinnati planer mill, 40in x 17ft long, 13 hp engine, sells off-site from metalworking ring on Sat; Carriages; Cleerman carriage; Debarkers; Morbark debarker w/Rosser head, 30 hp electric motor; Chop Saws; CTR sawbuck w/22ft deck; CTR Sawbuck w/60in bar and 14ft table; Shop made 12in sizer w/20hp electric motor;Hurricane 24N pop up saw, 10 hp, 230/460v; Auto feed cut off table w/stops; Edgers; 2024 Accu-Cut 636T edger; 2023 Accu-Cut 636T 6in x 36in edger; Rebuilt Cornell 36 edger, 6in x 36in cap., 2 blades, 1 movable, 6 month warranty; Edmonson 4in edger w/2 movable blades, 16ft out feed belt, hyd; Edmonson 2 blade edger, 1 movable, 16in blades, w 8ft infeed & 8ft outfeed; Chippers; Fulghum 48in 6 knife chipper; Rudnick & Enners 250 hp wood chipper, 480v 3ph electric system in a 6 x 10 building; Decks & Turn Tables; 3 strand 6ft x 10ft transfer deck w/incline and 60:1 gearbox on air motor; 2 strand 4ft x 28ft green chain w/3 hp electric motor; 5.5ft x 13ft transfer deck; 30in x 22ft roll case; 2 strand 6ft x 32ft log deck on 6.5ft metal posts; 13ft x 16ft 4 strand grading deck w/unscrambler;  Mellot 4 strand 10ft x 90ft green chain w/drive & 81x chain; 2 strand 4ft x 21ft green chain w/electric motor & gearbox; 2 strand log deck w/stop & load, 6ft x 38ft; 2 = Baker BT-0 turn tables; Conveyors & Roll Cases; New Supreme Mfg 3-30-23 Green chain, 3 strand, 10ft wide x 30ft long, gearbox drive, C-55 rooftop chain; New 3 = Supreme Mfg lumber carts, heavy duty, 42in wide x 92in long on casters, 4 stakes included; New Supreme 24-20-24 Roll case, 24in x 20ft long, gearbox drive, 6in rolls; 16in x 12ft live roll case w/4in rolls; 24in x 23ft belt conveyor w/take away belt; 2 section barn sweep, 48in x 30ft and 48in x 20ft w/electric motor; 120ft sawdust drag chain w/electric motor & gearbox; 30in x 18ft roll case; 24in x 9ft spiral roll case; 50 ft log trough; Blades; 56in Simons F-style blade; 2 – 56in blades; 3 = 56in saw blades; Misc; 2023 set of 3 heavy duty steel bridges, 30ft long; Siemens 125 hp 1785 rpm electric motor, 460v 3ph; Century 75 hp 1770 rpm electric motor, 230/460v 3ph; Reliance 40 hp 1775 rpm electric motor, 230/460v 3ph; Lincoln 30 hp electric motor; CSA 15 hp electric motor; Lincoln 10 hp electric motor; Shark 700 buzz saw; Blower pipe, 12in x 100 ft including elbows & Y’s; 30in x 15ft cat walk w/steps; Reliance 200 hp 1190 rpm electric motor; 7ft sawdust bucket; Trav-a-dial 7A machine carriage travel readout; 130 = .055 x 1.5in x 211in long, 7 degree bandsaw blades, 96 new in the box; Blowers; 36in sawdust blower; 15in x 36in blower, belt drive; Blower w19in inlet, 17in outlet, 50 hp, 480v; Honeyville HAL-16 cyclone w/piping; Firewood Processors; 2023 Wallenstein WP1624 firewood processor, 20 ton, 29 hp Briggs, 69 hrs; Pallet Equipment; Complete Brewco pallet board cut up system, will sell individually then offered as a combination; 4 strand deck, 7ft x 10ft; Brewco softride 7ft unscrambler; Brewco 82C 12in chop saw w/7ft infeed and 12ft outfeed powered rolls; Brewco BSSE Elite 2-head resaw w/sizer; Froedge 450 deduster; 2ft x 9ft belt conveyor; 2004 complete GTEK pallet board and runner cut up system, will sell individually then offered as a combination; 8ft x 15ft 3 chain log deck; GTEK 7ft unscrambler; GTEK 12in cut off saw, 34ft infeed, 8ft outfeed powered rolls; GTEK DASB 12in gangsaw, adjustable blades, 8ft infeed powered rolls, 7ft outfeed belt conveyor, top arbor 100 hp, bottom arbor 125 hp; 7ft x 18in flat belt vertical conveyor; 13ft x 18in flat belt vertical conveyor; Pallet notcher; Clary Sidewinder 56in pallet dismantler; Morgan saw; Stackers; GTEK 4600 pallet board stacker, 42in x 12ft take away; Bronco pallet stacker; Misc; Wright Machine w-150HD blade sharpener, 230v; AFE 850’s Moons saw sharpener, 230v; ACME circular saw sharpener; Mack R Hood lumber cart wheels; Firewood bundler, 110v;

*Selling 2 Days*. (Dealers and Wholesalers look-in.) New Tools; Including brands like Irwin, Milwaukee, DeWalt, Makita, Snap On, Vise Grip, Diablo, Morse, Norton and others. Includes (all new) vise grips, chalk lines, chalk, C-clamps, vises, levels, socket sets, wrench sets, bar clamps, sandpaper, sanding belts, coolers, hole saws, cordless drills, floor jacks, hand saws, hole saws, pliers, helmets, router bits, welding wire, reflective safety coats, drill bits, saw blades, cement blades, caution flags, bandsaw blades, including 85 skids of tools, gloves, cleaning supplies, etc. This consignment comes from a Distribution Warehouse Liquidation. We will sell this stuff individually and in bulk lots

Brand New DeWalt, Milwaukee & Makita Tools: We will have another very nice line-up of DeWalt cordless power tools to sell including some of the latest and greatest models and tools that DeWalt has to offer with all warranties intact. We will also have lots of new Milwaukee and Makita tools to sell in these sessions as well.

New Sioux Air Tools: Another nice consignment of Sioux Tools including new tools, demos & salesmen’s samples, of grinders, sanders, drills, riveters, chisels, impact wrenches, impact drivers, screwdrivers and more.

 

Auction Terms and Information

Auction Terms: Cash, Check or Credit Card w/valid ID. There will be a 7.5% buyer's premium on-site with an additional 3% for all credit card purchases. Different terms for Online bidding will apply. All items are sold “as is, where is with no warranty expressed or implied." Sales tax does apply unless exempt.

Auction Information: For complete and updated auction details, catalogs & photo’s as well as online bidding links please visit www.airworksauction.com or visit auctionzip.com auction ID 40056.   (No internet = No problem) Request full auction listings and catalogs from the Air Works Auction Office at P.O. Box 242 Kidron, OH. 44636 or Office Phone 330.749.4362.

Auctioneer Note: We are excited to invite everyone out to help us celebrate our 35th year in the auction business. We are anticipating our largest sale to date.

Unloading Schedule

Monday Feb. 12 from 8:00 A.M. to 7:00 P.M.,

Tuesday & Wednesday. Feb. 13 & Feb. 14 from 8:00 A.M. to 4:00 P.M.

Thursday Morning 7:30 to 12:00 Noon (Reserved for out of state consignors)

                                                                                                                                

Air Works Auction                                        Ph. 330-749-4362

PO Box 242                                                  Fax 330-816-0006

Kidron OH 44636                                 office@airworksauction.com