Aug. 2020 Special Woodworking Auction

Aug. 2020 Woodworking Auction

Friday Aug. 21st 9:00 AM

Air Works Auction Woodworking Division

Location; Sprunger Building - Kidron OH  

GPS 13071 Emerson Rd Apple Creek OH 44606

20 plus New woodworking machines w/warranties.

Will be selling 2 hours of New Dewalt, Milwaukee and Makita cordless tools.

August 2020 Air Works Auction

Woodworking Division

GPS Location: Sprunger Building 13071 Emerson Rd. Kidron Apple Creek OH 44606

Bid Online

Friday August 21^st

Table Saws;  New 4016 Oliver 10” table saw w/52” table; 3 New Classic table saws & fence parts; Powermatic 63 table saw, 220v 1 ph; Powermatic 66 table saw, hyd; Powermatic 66 table saw w/ Biesmeyer fence and extended table, hyd; Delta 10” table saw w/fence, hyd driven; Altendorf F-45 sliding table saw, 10’ sliding w/miter gauge, 3 ph; Delta Unisaw, 10” tilting arbor table saw, 1 ph; 2 - Delta Unisaw 34-806 table saw, 230v 3 ph; Grizzly 10” table saw, 220v 1 ph; Delta 10” table saw, 110v; Straightline Rip; Stonewood 355 straight line rip saw, 15 hp arbor motor, 2 hp on feeder, 230v 3 ph; Cantek CR12 ripsaw, no motor; Cut Off Saws; Delta radial arm saw, 230v 3 ph; Delta chop saw, 115v; 2 - Omga radial arm saw, 460v 3 ph; Whirlwind 14” upcut saw, left hand, 230v 3 ph; Whirlwind 212R upcut saw, 460v 3 ph, w/pneumatic auto stop system; Hitachi C90051 8 ½” sliding compound miter saw, 120v; Chioga 10” sliding chopsaw, 110v; Bandsaws; New Stonewood SBW5300H 20” bandsaw, heavy duty, 220v 3 phase; New Stonewood SBW4300A 17” bandsaw, 220v 1 phase; SCMI 17” bandsaw, lineshaft powered; Rockwell 28350 bandsaw w/air clutch, lineshaft; Grizzly G1073 16” bandsaw, hyd; Jet bandsaw; National sawworks bandsaw, 38” wide reach, w/24 x 4” table, electric; Planers; New Stonewood STC-760 30” planer w/spiral head, electric motor, digital readout; New Stonewood ST-24 24” planer w/spiral head, w/pulley and belts (no Motor); New Stonewood ST-24AH 24” planer w/spiral head and digital readout, 230v 3 phase; New Oliver 4455 22” planer w/Byrd cutter head, 220v 1 ph; Powermatic 201 22” planer, 3 ph; Oliver 20” straight knife planer, 220v 3 ph; Extrema Magnum XP 24” double sided planer 480v 3 ph; Woodmaster W725 24” planer, hyd; Grizzly G1033 20” straight knife planer w/3 sets of knives and blade setter;  Powermatic 180 18” planer, straight knife; SAC planer, 22” straight knife; Jointers; New Oliver 4260 12” parallelogram jointer w/spiral cutterhead, 230v 3 phase; New Oliver 4225 6” parallelogram jointer w/4 sided helical head, 1 hp 115v; Mini Max FS-350 12” jointer/planer, 3 ph; Powermatic #50 6” jointer; Delta 6” jointer, 110v; Delta 6” jointer, hyd; CNC Routers; AXYZ CNC 4008 router w/11.5 hp vacuum pumps, 3 ph;  Onsrud 36210-X overhead router, 230v 3 ph;  Shapers; New Oliver 10047 shaper, 1 ¼” spindle, 3 hp 220v 1 phase; New Oliver 4705 shaper, 1 ¼“ spindle, w/digital read out, 230v 3 phase; SCMI T110 1 ¼“ shaper, 230v 3 ph; Ritter R-10 shaper, hyd, driven; Ritter R10125SP 1 ¼” shaper, hyd; Powermatic shaper, 1 ¼” spindle, hyd; Circle T 213 lock miter machine, hyd powered; Cantek SS-512C shaper w/power feed, 230v 3 phase; Invicta shaper It-14, lineshaft powered; SCMI Mini Max T40N shaper w/Delta power feed, 230 3 ph; Delta shaper, 1 ph; Unique 325 4-head shape & sand door machine, lineshaft powered; Power Feeds; New Stonewood AF04 power belt feeder 220v 3 phase; Powermatic PF33 power feed, air powered; Edge Sanders; New Oliver 6315 edge sander, 9” x 138” oscillating, 3 hp 230v 1 phase; New Oliver 6305 6” x 89” edge sander, 1.5 hp 110v; CA model 236 plantetary sander, 3 phase 460 v; Crouch 6” x 108” edge sander 480v 3 ph; Northtech NT-120E-HD edge sander, 9” x 138”, hyd driven; Jet 6” x 89” edge sander w/air clutch, lineshaft; Powermatic 013 edge sander; Belt/Disc sander, 110v; Widebelt Sanders; Shop Fox W1689 16” widebelt sander, lineshaft ready w/air clutch; Sunhill 25” x 75” widebelt sander, mechanical tracking, lineshaft;  Jet 708404 37” x 75” widebelt sander, lineshaft powered; Speed Sander widebelt sander; Extrema 37” x 75” wide belt sander, lineshaft, (bad electricals); Doble head feed through sander for chair parts, lineshaft ready; Accura DS-380 double drum sander, adjustable speed, single phase; Larick 410 shape n sand machine, hyd; Larick 150 profile sander, lineshaft powered; Edge Bander; Holzer 1310-1 sprint edge bander, 3 ph;   Boring Machines; New Stonewood 16-WUS024 13 spindle manual linebore machine w/enclosed stand; Conquest 23 spindle boring machine, 115v; Ritter R46 lineboring machine, 230v 3 phase;  Ritter C6C17FC6G line boring machine, ¾ hp; New 10062 Oliver 17” floor model drill press, 115v; Grizzly 14” drill press, air powered; Doucet 700-3 adjustable 3 head vertical drilling machine, 230v/460v; Delta 17-965 drill press; Sheer DB20 drilling machine, 230v 3 ph; Mortise & Tenoners; Powermatic chain mortiser, air powered; Grizzly G-4814 mortiser, hyd; Powermatic 2-A single end tenoner, 3 phase; Germany made shaper modified tenoner, 230/460v; Dovetailers; New Stonewood JDT65 manual dovetailer; Northtech DTM-1S4 automatic dovetail machine, 460v 3 ph; Wyson & Miles dovetail machines model 600 & 601, hyd; Northtech dovetailer, single spindle, 220v 1 ph; Porter Cable omni jig; JLT 6’ clamp carrier w/12 clamps; JLT 180A panel flattener; Custom door clamping table, air powered; JLT glue spreader for doors; Sanding Tables; New DUS-3 x 6 sanding table 115v; Sandpro 3 x 4 downdraft table, 120v; Custom sanding table; Down draft table, 115/230; Dust collectors; New Nederman S-1000 dust collector, 5000 CFM, 230/480v 3 phase; Outdoor dust collecting system, 9” cyclone, bin, blower, lineshaft; Outdoor dust collecting system, 12” cyclone, blower return air baghouse, hydraulic driven; Aget 7000 bag house; Cyclone 10’ hi x 4 ½’ wide w/10” outlet; Blower; Sawdust bin 6’ x 4’ x 8’, overall 14’ tall; Jet cyclone dust collector, 2 hp; Dustek 750 dust collector w/12” inlet, 3000 cfm, with newer 7.5 hp 230v 3 phase motor; Dust Technology DT-50 dust collector, 5 hp, 2 bag, 230v; Clear Vue dust collector, 230v 3 ph; Steel City 65200 dust collector, 110v;  Jet DC-1200 1 bag dust collector; Senco UF0105D blower, 8” inlet, lineshaft driven; Murphy Rogers blower, 10” inlet, 7.5 hp; Cyclone w/10” inlet and misc pipe; Dayton air cleaner/filter w/air clutch, lineshaft; 4 pcs. Dyna log furniture equipment, line shaft powered, MT60 post chucker, DR80 post drill, KO600 drum sander, CS60 post saw, all in good condition;  King 7” planer molder, 220v 1 ph; Misc. Woodworking Equipment; Untha LR1000 wood grinder w/hopper feed and ½” screen, 480v 3 ph; Hawker D3000 dowel machine w/tooling, 1” to 2 ½”, hyd; 2 – 1000 KG air lifts model AKA Kallesoe air lifts; Rockwell 46-011 10” lathe, 110v; Craftsman scroll saw, 110v; Dremel scroll saw, 110v; Belt sander, 110v; Titan 1.4 million BTU air make up unit, propane w/controls; Royce dado blade; Biscit jointer; Swivel top lift table; Sand paper racks; Sanding inspection lights; Desicant air dryer, 110v; 3 roll conveyor; Hydraulic motor; 2’ x 2’ x 3’ oil tank;

Power Units & Heavy Equipment; Waukasha F18GLD natural gas engine, 400 hp, 10,000 hrs, electronic controls, includes exhaust pipe & muffler, excellent condition; Ingersoll Rand T-30 air compressor, 3 ph; Quincy QT7E80V700020 air compressor, 115v; Young remote radiator 6x7 w/100 gallon of antifreeze, fan powered by electric motor; John Deere 550 dozer, sn T00550C390268, 6 way blade, meter shows 1504 hrs; 2019 Homesteader 7 x 16 enclosed trailer w/e-track, ramp door & side door, 7000 gvw, used very little; 2017 Homesteader Trailer, 8’ x 24’ enclosed V nosetrailer w/D rings in floor, ramp door & side door, 9950 GVW, excellent condition; United 6 x 12 single axle enclosed trailer, double swing doors; Complete hydraulic system, tank, 10 pumps, 28 motors, lineshaft, coolers, valves, etc;

Antiques; Homelite saw, 18” cut, blade; David Bradley #917-60023 19” cut, blade; Mall #1M6 chainsaw w/18” bar; Mall #12A chainsaw, 24” bar; Mall #11 chainsaw, 40” bar w/handle; Clinton chainsaw w/15” bar; 7-Stihl Wood Boss chainsaws w/16” bars; Stihl chainsaw, early 60’^s ; Johnson #A35 boat motor; Early REO 1 cyl. gas engine; Briggs & Stratton engine; Early lawn mower w/Briggs & Stratton engine; 7-water pumps w/gas engines;

Dewalt Battery Tools

4 – Dewalt DCD996B, 20v hammerdrill; 6 – Dewalt DCF887B, 20v 3 speed impactor; 10 – Dewalt DCB115, 20 v max 110 v electric charger; 10 – Dewalt DCB203, 20v 2AH battery; 5 – Dewalt DCB205-2CK, 20v 5AH battery kit w/charger; 2 – Dewalt DCC201B, 20v inflator; 2 – Dewalt DCD740B, 20v max, right angle drill/driver (bare tool); 2 – Dewalt DCE100B, 20v hi-volume blower; 6 – Dewalt DCE511B, 20v AC/DC desk fan; 1 – Dewalt DCE560B, 20v 10 oz. glue gun; 2 – Dewalt DCF890B, 20v 3/8” impact; 2 – Dewalt DCF894B, 20v ½” mid range hog ringer; 2 – Dewalt DCF899B, 20v hi-torque impact wrench (bare tool); 4 – Dewalt DCG412B, 20v max grinder (bare tool); 2 – Dewalt DCG571B, 20v grease gun (bare tool); 2 – Dewalt DCH133M2, 20v SDS plus hammer drill; 1 – Dewalt DCK494P2, 4 kit, 5-AH drill, impact, recip saw combo; 2 – Dewalt DCL040, 20v max LED flashlight; 2 – Dewalt DCL043, 20v spot light; 2 – Dewalt DCL079B, 20v tripod light 3000 lumens; 2 – Dewalt DCS331B, 20v max jig saw; 2 – Dewalt DCS356B, 20v 3 speed multi tool; 2 – Dewalt DCS367B, 20v compact recip saw; 4 – Dewalt DCS380B, 20v max recip saw; 2 – Dewalt DCS391B, 20v max circular saw; 2 – Dewalt DCS551B, 20v drywall cutout tool; 2- Dewalt DCS570B, 20v 7 ¼” circular saw; 2 – Dewalt DCV581H, 20v 2 gallon wet/dry AC/DC vac; 2 – Dewalt DCW210B, 20v random orbital sander; 2 – Dewalt DCW600B, 20v compact router; 12 – Dewalt nylon tool bag; 4 – Dewalt DCB606-2, 60v flexvolt 6 amp 2-pk; 2 – Dewalt DCG414B, 60v grinder (bare tool); 1 – Dewalt DCK667X1, 60v chainsaw/blower; 1 – Dewalt DCS389B, 60v max Gen II series recip saw; 2 – Dewalt DCS575B, 60v circular saw (bare tool);

Milwaukee Battery Tools

4 - Milwaukee 0886-20, M18 jodsite fan; 2 - Milwaukee 2354-20, M18 LED searchlight; 2 - Milwaukee 2361-20, 18v 1100 lumen work light; 1 - Milwaukee 2446-21XC, M12 grease gun; 1 - Milwaukee 2463-21RS, M12 impact/inflater/handtools combo; 1 - Milwaukee 2520-21XC, M12 Hackzall, fuel combo; 2 - Milwaukee 2626-20, M18 multi-tool (bare tool); 2 - Milwaukee 2630-20, M18 circular saw (bare tool); 1 - Milwaukee 25646-20, M18 grease gun; 2 - Milwaukee 2680-20, M18 4 1/2" grinder; 2 - Milwaukee 2719-20, hacksaw (bare tool); 1 - Milwaukee 2720-20, M18 sawzall (bare tool); 1 - Milwaukee 2722-21HD M18 recip saw, 12AH battery; 2 - Milwaukee 2723-20, M18 1.25 hp router (bare tool); 2 - Milwaukee 2724-20, M18 blower (bare tool); 2 - Milwaukee 2725-20, M18 string trimmer (bare tool); 1 - Milwaukee 2726-20, M18 hedge trimmer (bare tool); 1 - Milwaukee 2732-21HD M18 7 1/4" circular saw, 12AH battery; 1 - Milwaukee 2737-20, M18 jigsaw (bare tool); 2 - Milwaukee 2760-20, M18 impact surge hyd driver (bare tool); 1 - Milwaukee 2767-20, M18 Gen II 1/2" impact (bare tool); 2 - Milwaukee 2803-20, M18 drill (bare tool); 2 - Milwaukee 2853-20, BL fuel 1/4" hex impact; 2 - Milwaukee 2866-20, M18 screw gun (bare tool); 2 - Milwaukee 2893-22CX, M18 2AH & 4AH combo drill/impact w/charger; 2 - Milwaukee 48-11-1812, M18 12AH high output battery; 2 - Milwaukee 48-11-1865, M18 6AH high output battery; 50 - Milwaukee 48-59-1808, 18volt rapid charger; 6 - Milwaukee 48-32-4062 74 pc. Impact shockwave bit set; 6 - Milwaukee 49-22-1129 demolition recip blade set; 4 - Milwaukee 2103, headlight, AAA batteries;

Makita Battery Tools

2 - Makita B-61656-10, 7 1/4" circular saw; 10 - Makita BL1850B, 18v battery w/charge indicator 5AH; 4 - Makita BL1860B, battery 6.0 amp HR; 2 - Makita CT226RX, 12v drill/impact combo, 2AH; 6 - Makita DC18RC, 18v lithium-ion rap charger; 6 - Makita DCF102Z, 18v 7.125" 3 speed fan; 2 - Makita XAG04Z, 4.5" grinder; 4 - Makita XBU02Z 18v x2  blower (bare tool); 2 - Makita XCU02Z, 18v x2 chain saw (bare tool); 2 - Makita XDT13Z, impact; 1 - Makita XHU02Z, 18v hedge trimmer (bare tool); 4 - Makita XLC02R1B, 18v floor sweep vacuum w/battery & charger; 1 - Makita XML08PT, 18v x2 21" lawn mower 5AH; 1 - Makita XMT03Z, 18v multi tool (bare tool); 1 - Makita XOC01Z, 18v roto zip cutout tool; 10 - Makita XPH07Z, 18v hammer drill (bare tool); 2 - Makita XRJ05Z, 18v recip saw (bare tool); 2 - Makita XRU15Z, 18v x2 string trimmer (bare tool); 2 - Makita XSH06Z, 18v x2 circular saw; 1 - Makita XSL06PT, 18v x2 10" sliding miter saw; 2 - Makita XT335S, 18v drill/impact/light combo 3AH; 2 - Makita XTR01Z, 18 v router; 1 - Makita XWT08Z, 18v high torque impact wrench; 1 - Makita XWT11Z, 18v 3 speed 1/2" impact wrench;

Notice; Country Hardware Store is closing it’s doors and consigning their contents to this auction.

Auction Terms: Cash, Check or Credit Card w/valid ID. There will be a 5% buyer's premium on-site with an additional 3% for all credit card purchases. Different terms for Online bidding will apply. All items are sold “as is, where is with no warranty expressed or implied." Sales tax does apply unless exempt.

Auction Information: For complete and updated auction details and photo’s as well as online bidding links please visit www.airworksauction.com or visit auctionzip.com auction ID 40056.   (No internet = No problem) Request full auction listing from the Air Works Auction Office at P.O. Box 242 Kidron, OH. 44636 or Office Phone 330.749.4362.

Auctioneer Note: We are excited to offer new and good used woodworking equipment. Also some enclosed trailers and a John Deere Dozer. Keep checking back this list will continue to grow until auction day.

Unloading Schedule

Wednesday Aug. 19^th & Thursday Aug. 20^th 8:00 AM to 4:00 PM                                                                                       

Air Works Auction                                        Ph. 330-749-4362

PO Box 242                                                  Fax 330-816-0006

Kidron OH 44636                                 office@airworksauction.com 

www.airworksauction.com